Torque PID for MAZDA SKYACTIVD - Google Play

This is a plugin for using PIDs for Mazda SKYACTIV-D equipped vehicles with the Torque Pro app.

Precautions
* Use OBD communication via the Torque Pro app for diagnostic purposes only. Avoid using it while the vehicle is in motion, as unexpected behavior may occur.
* The airbag warning light may flash due to OBD communication. In that case, stop using the device performing the OBD communication. Consult your dealer for guidance on identifying the warning light flashing pattern.
* Please use this plugin at your own risk, understanding the above precautions.

Requirements
* Torque Pro
* Android 7.0 or later device
* Adapter (such as a Bluetooth adapter) to connect the Android device to the vehicle's OBD port (DLC)

How to Use
(1) Install this app on an Android device with Torque Pro installed.
(2) Launch Torque Pro.
(3) From the Torque Pro home screen menu, go to "Settings" → "Plugins" → "Plugin List" and confirm that "MAZDA SKYACTIV-D" has been added. (4) From the Torque Pro home screen menu, go to "Settings" → "Extended PID/Sensor Management". Select "MAZDA SKYACTIV-D" and "MAZDA SKYACTIV-D EXTRA" from the "Predefined Sets" menu and confirm that the PIDs have been added.

(5) The added PIDs can be used in the same way as Torque Pro's standard PIDs.

Compatible Vehicles
* Operation has been confirmed for 2017 and 2025 registered CX-5 (KF series) vehicles.
* Operation has not been confirmed for other vehicles; please use at your own risk.
* Cannot be used with vehicles compliant with cybersecurity regulations, such as Mazda's 7th generation models.
* Some PIDs may not be supported depending on the vehicle model and year.

Corresponding PID
• Battery Days in Service (BATT DAY)
Number of days the battery is in service
This is reset to 0 when the charge/discharge cumulative amount is reset during battery replacement.
• Battery Estimated State of Charge (BATT SOC)
Estimated battery charge state
• Battery Fluid Temperature (BATT TEMP)
Battery fluid temperature
• Boost Pressure (BOOST)
Intake manifold gauge pressure
• Brake Switch (BRAKE SW)
Brake switch status (1 when switch is ON, 0 otherwise)
• Brake Fluid Pressure (BFP)
Brake fluid pressure
• Charge Air Cooler Temperature (CACT)
Intercooler temperature
• Coupling Solenoid Duty Cycle (CUP SOL)
Duty cycle of the solenoid in the AWD system coupling unit
• Distance from Bumper to Target (DIST BMP TGT)
Distance to the object ahead measured by the near-infrared laser sensor
• DPF Differential Pressure (DPF DP)
　DPF differential pressure (difference in exhaust pressure before and after DPF)
・DPF Lamp Count (DPF LMP CNT)
　Number of times the DPF warning light illuminated
・DPF PM Accumulation (DPF PM ACC)
　PM accumulation amount (estimated from DPF differential pressure, etc.)
・DPF PM Generation (DPF PM GEN)
　PM generation amount (estimated from engine speed, intake volume, fuel injection volume, etc.)
・DPF Regeneration Count (DPF REG CNT)
　Number of DPF regenerations
・DPF Deterioration Counter Level 1 (DPF DET CNT L1)
　DPF deterioration counter level 1
　Number of times the DPF regeneration interval was extremely short
　Mainly applicable to vehicles equipped with SKYACTIV-D 1.5
・DPF Deterioration Counter Level 2 (DPF DET CNT L2)
　DPF deterioration counter level 2
　Number of times the DPF regeneration interval was somewhat short
　Mainly applicable to SKYACTIV-D Vehicles equipped with 1.5 are compatible.
• DPF Regeneration Distance (DPF REG DIS)
Distance traveled since the last DPF regeneration completion.
• DPF Regeneration Distance 01-10 (DPF REG DIS 01-10)
Distance until a certain amount of PM accumulates (for the last 10 cycles).
This differs from the actual distance traveled between DPF regenerations.
Mainly compatible with vehicles equipped with SKYACTIV-D 1.5.
• DPF Regeneration Distance Average (DPF REG DIS AVG)
Average value of distance traveled between DPF regeneration completions.
• DPF Regeneration Distance Average (EWMA) (DPF REG AVGD)
Exponentially weighted moving average of distance traveled between DPF regeneration completions.
• DPF Regeneration Request (DPF REG REQ)
DPF regeneration request status (1 when DPF regeneration is requested, 0 otherwise).
• DPF Regeneration Status (DPF REG STAT)
　DPF regeneration status (1 when DPF regeneration is in progress, 0 otherwise)
・DPF Regeneration Trigger (DPF REG PCT)
　Percentage value of the trigger for starting DPF regeneration
・EGR A Valve Position (EGR A POS)
　EGR A valve position
・EGR B Valve Position (EGR B POS)
　EGR B valve position
・Fuel Injection Amount Learning Count (Automatic) (INJ AL FRQ)
　Number of times automatic fuel injection amount learning has been performed
・Fuel Injection Amount Learning Count (Manual) (INJ WL FRQ)
　Number of times manual fuel injection amount learning has been performed
・Fuel Injection Amount Learning Distance (Automatic) (INJ AL DIS)
　Distance traveled when automatic fuel injection amount learning was last performed
・Fuel Injection Amount Learning Distance (Manual) (INJ WL DIS)
Distance traveled when fuel injection quantity learning (manual) was last performed
- Intake Manifold Absolute Pressure (IMAP)
Absolute pressure of the intake manifold
- Intake Shutter Valve Position (ISV POS)
Intake shutter valve position
- Gear (GEAR)
AT gear position
- Lock Up (LOCK UP)
AT lock-up status (1 for lock-up, 0 otherwise)
- Oil Change Distance (OIL CHG DIS)
Distance traveled since resetting oil data during an oil change
- Stop Lamp (STOP LMP)
Stop lamp illumination status (1 for illumination, 0 for off)
- Target Distance (TGT DIS)
Distance to the target object ahead measured by the MRCC system's millimeter-wave radar
- Torque Actual (TORQUE ACT)
Engine torque
- Total Distance (TOTAL DIST)
Total distance traveled
- Transmission Fluid Temperature (TFT)
Transmission oil temperature